Handbook of Molded Part Shrinkage and Warpage

Written By Jerry Fischer
Handbook of Molded Part Shrinkage and Warpage
  • Publsiher : William Andrew
  • Release : 31 December 2012
  • ISBN : 1455730572
  • Pages : 292 pages
  • Rating : 4/5 from 21 reviews
GET THIS BOOKHandbook of Molded Part Shrinkage and Warpage


Read or download book entitled Handbook of Molded Part Shrinkage and Warpage written by Jerry Fischer which was release on 31 December 2012, this book published by William Andrew. Available in PDF, EPUB and Kindle Format. Book excerpt: How easy life would be if only moldings were the same size and shape as the mold. But they never are, as molders, toolmakers, designers and end users know only too well. Shrinkage means that the size is always different; warpage often changes the shape too. The effects are worse for some plastics than others. Why is that? What can you do about it? The Handbook of Molded Part Shrinkage and Warpage is the first and only book to deal specifically with this fundamental problem. Jerry Fischer’s Handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effect of molding process conditions, and explains why you never can have a single ‘correct’ shrinkage value. It goes on to demonstrate how to alleviate the problem through careful design of the molded part and the mold, and by proper material selection. It also examines computer-aided methods of forecasting shrinkage and warpage. And most important of all, the Handbook gives you the data you need to work with. . Authoritative and rooted in extensive industrial experience, the expert guidance contained in this handbook offers practical understanding to novices, and new insights to readers already skilled in the art of injection molding and mold making. Contains the answers to common problems and detailed advice on how to control mold and post-mold shrinkage and warpage. Case Studies illustrate and enrich the text; Data tables provide the empirical data that is essential for success, but hard to come by.

Handbook of Molded Part Shrinkage and Warpage

Handbook of Molded Part Shrinkage and Warpage
  • Author : Jerry Fischer
  • Publisher : William Andrew
  • Release Date : 2012-12-31
  • Total pages : 292
  • ISBN : 1455730572
GET BOOK

Summary : How easy life would be if only moldings were the same size and shape as the mold. But they never are, as molders, toolmakers, designers and end users know only too well. Shrinkage means that the size is always different; warpage often changes the shape too. The effects are worse ...

Handbook of Molded Part Shrinkage and Warpage

Handbook of Molded Part Shrinkage and Warpage
  • Author : Jerry M. Fischer
  • Publisher : Unknown
  • Release Date : 2003
  • Total pages : 265
  • ISBN : 1455730572
GET BOOK

Summary : The handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effect of molding process conditions, and tells why you never can have a single """"correct"""" shrinkage value. But that's not all. The handbook shows how to alleviate the ...

Handbook of Molded Part Shrinkage and Warpage

Handbook of Molded Part Shrinkage and Warpage
  • Author : Jerry Fischer
  • Publisher : William Andrew
  • Release Date : 2004-01-14
  • Total pages : 263
  • ISBN : 1455730572
GET BOOK

Summary : The handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effect of molding process conditions, and tells why you never can have a single ""correct"" shrinkage value. But that's not all. The handbook shows how to alleviate the ...

Injection Molding Handbook

Injection Molding Handbook
  • Author : D.V. Rosato,Marlene G. Rosato
  • Publisher : Springer Science & Business Media
  • Release Date : 2012-12-06
  • Total pages : 1460
  • ISBN : 1455730572
GET BOOK

Summary : This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, ...

Intelligent Optimization of Mold Design and Process Parameters in Injection Molding

Intelligent Optimization of Mold Design and Process Parameters in Injection Molding
  • Author : Mehdi Moayyedian
  • Publisher : Springer
  • Release Date : 2018-11-02
  • Total pages : 145
  • ISBN : 1455730572
GET BOOK

Summary : This book describes an effective framework for setting the right process parameters and new mold design to reduce the current plastic defects in injection molding. It presents a new approach for the optimization of injection molding process via (i) a new mold runner design which leads to 20 percent reduction in ...

Plastics Process Analysis Instrumentation and Control

Plastics Process Analysis  Instrumentation  and Control
  • Author : Johannes Karl Fink
  • Publisher : John Wiley & Sons
  • Release Date : 2021-03-09
  • Total pages : 416
  • ISBN : 1455730572
GET BOOK

Summary : This book focuses on plastics process analysis, instrumentation for modern manufacturing in the plastics industry. Process analysis is the starting point since plastics processing is different from processing of metals, ceramics, and other materials. Plastics materials show unique behavior in terms of heat transfer, fluid flow, viscoelastic behavior, and a ...

Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications

Advances in Engineering Materials  Structures and Systems  Innovations  Mechanics and Applications
  • Author : Alphose Zingoni
  • Publisher : CRC Press
  • Release Date : 2019-08-21
  • Total pages : 882
  • ISBN : 1455730572
GET BOOK

Summary : Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a ...

Innovative Developments in Design and Manufacturing

Innovative Developments in Design and Manufacturing
  • Author : J. N. Reddy
  • Publisher : CRC Press
  • Release Date : 2009-09-22
  • Total pages : 748
  • ISBN : 1455730572
GET BOOK

Summary : Essential reading on the latest advances in virtual prototyping and rapid manufacturing. Includes 110 peer reviewed papers covering: 1. Biomanufacturing, 2. CAD and 3D data acquisition technologies, 3. Materials, 4. Rapid tooling and manufacturing, 5. Advanced rapid prototyping technologies and nanofabrication, 6. Virtual environments and...

Multifunctionality of Polymer Composites

Multifunctionality of Polymer Composites
  • Author : Klaus Friedrich,Ulf Breuer
  • Publisher : William Andrew
  • Release Date : 2015-05-21
  • Total pages : 996
  • ISBN : 1455730572
GET BOOK

Summary : Multi-Functionality of Polymer Composites: Challenges and New Solutions brings together contributions from experts in the field of multifunctionality, presenting state-of-the-art discussion of this exciting and rapidly developing field, thus key enabling technologies for future applications. The text will enable engineers and materials scientists to achieve multifunctionality in their own products ...

Fluoroelastomers Handbook

Fluoroelastomers Handbook
  • Author : Jiri George Drobny
  • Publisher : William Andrew
  • Release Date : 2016-04-27
  • Total pages : 584
  • ISBN : 1455730572
GET BOOK

Summary : Fluoroelastomers Handbook: The Definitive User's Guide, Second Edition is a comprehensive reference on fluoroelastomer chemistry, processing technology, and applications. It is a must-have reference for materials scientists and engineers in the automotive, aerospace, chemical, chemical process, and power generation industries. Covering both physical and mechanical properties of fluoroelastomers, it is ...

Using the Engineering Literature

Using the Engineering Literature
  • Author : Bonnie A. Osif
  • Publisher : CRC Press
  • Release Date : 2006-08-23
  • Total pages : 640
  • ISBN : 1455730572
GET BOOK

Summary : The field of engineering is becoming increasingly interdisciplinary, and there is an ever-growing need for engineers to investigate engineering and scientific resources outside their own area of expertise. However, studies have shown that quality information-finding skills often tend to be lacking in the engineering profession. Using the Engineerin...

Handbook of Specialty Fluorinated Polymers

Handbook of Specialty Fluorinated Polymers
  • Author : Susanta Banerjee
  • Publisher : William Andrew
  • Release Date : 2015-04-24
  • Total pages : 340
  • ISBN : 1455730572
GET BOOK

Summary : Fluoropolymers are used in applications demanding service at enhanced temperature while maintaining their structural integrity and have excellent combination of chemical, physical and mechanical properties. Advancements in materials and processing technology mean that a huge amount of research is currently taking place into new, high performance applications for specialty fluorinated ...

Handbook of Fillers

Handbook of Fillers
  • Author : George Wypych
  • Publisher : Elsevier
  • Release Date : 2021-01-28
  • Total pages : 1184
  • ISBN : 1455730572
GET BOOK

Summary : Covers available fillers and their properties, their effect on filled materials such as mechanical properties, rheology, morphology, flammability, and recycling, and their use in practical applications...

Designing Successful Products with Plastics

Designing Successful Products with Plastics
  • Author : Mark T. MacLean-Blevins
  • Publisher : William Andrew
  • Release Date : 2017-08-28
  • Total pages : 324
  • ISBN : 1455730572
GET BOOK

Summary : Designing Successful Products with Plastics: Fundamentals of Plastic Part Design provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. The book shows how integrating four key choices—materials, processes, tooling and design—in every design decision allows the designer to fully ...

Handbook of Metal Injection Molding

Handbook of Metal Injection Molding
  • Author : Donald F. Heaney
  • Publisher : Woodhead Publishing
  • Release Date : 2019-05-21
  • Total pages : 656
  • ISBN : 1455730572
GET BOOK

Summary : Metal injection molding combines the most useful characteristics of powder metallurgy and plastic injection molding to facilitate the production of small, complex-shaped metal components with outstanding mechanical properties. Handbook of Metal Injection Molding, Second Edition provides an authoritative guide to this important technology and its applications. Building upon the success ...