Additive Manufacturing Technologies

Written By Ian Gibson
Additive Manufacturing Technologies
  • Publsiher : Springer
  • Release : 26 November 2014
  • ISBN : 1493921134
  • Pages : 498 pages
  • Rating : 4/5 from 21 reviews
GET THIS BOOKAdditive Manufacturing Technologies


Read or download book entitled Additive Manufacturing Technologies written by Ian Gibson which was release on 26 November 2014, this book published by Springer. Available in PDF, EPUB and Kindle Format. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered

Additive Manufacturing Technologies

Additive Manufacturing Technologies
  • Author : Ian Gibson,David Rosen,Brent Stucker
  • Publisher : Springer
  • Release Date : 2014-11-26
  • Total pages : 498
  • ISBN : 1493921134
GET BOOK

Summary : This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and ...

Modeling and Simulation of Functionalized Materials for Additive Manufacturing and 3D Printing Continuous and Discrete Media

Modeling and Simulation of Functionalized Materials for Additive Manufacturing and 3D Printing  Continuous and Discrete Media
  • Author : Tarek I. Zohdi
  • Publisher : Springer
  • Release Date : 2017-12-22
  • Total pages : 298
  • ISBN : 1493921134
GET BOOK

Summary : Within the last decade, several industrialized countries have stressed the importance of advanced manufacturing to their economies. Many of these plans have highlighted the development of additive manufacturing techniques, such as 3D printing which, as of 2018, are still in their infancy. The objective is to develop superior products, produced at ...

Additive Manufacturing Processes

Additive Manufacturing Processes
  • Author : Sanjay Kumar
  • Publisher : Springer Nature
  • Release Date : 2020-05-26
  • Total pages : 205
  • ISBN : 1493921134
GET BOOK

Summary : This book provides a single-source reference to additive manufacturing, accessible to anyone with a basic background in engineering and materials science. Unlike other books on additive manufacturing that include coverages of things such as machine architecture, applications, business and present market conditions, this book focuses on providing comprehensive coverage of ...

3d Printing And Additive Manufacturing Principles And Applications Fifth Edition Of Rapid Prototyping

3d Printing And Additive Manufacturing  Principles And Applications   Fifth Edition Of Rapid Prototyping
  • Author : Chee Kai Chua,Kah Fai Leong
  • Publisher : World Scientific Publishing Company
  • Release Date : 2016-11-29
  • Total pages : 456
  • ISBN : 1493921134
GET BOOK

Summary : Additive Manufacturing (AM) technologies are developing impressively and are expected to bring about the next revolution. AM is gradually replacing traditional manufacturing methods in some applications because of its unique properties of customisability and versatility. This book provides a very comprehensive and updated text about different types of AM technologies, ...

Science Technology and Applications of Metals in Additive Manufacturing

Science  Technology and Applications of Metals in Additive Manufacturing
  • Author : Bhaskar Dutta,Sudarsanam Babu,Bradley H. Jared
  • Publisher : Elsevier
  • Release Date : 2019-08-15
  • Total pages : 354
  • ISBN : 1493921134
GET BOOK

Summary : Science, Technology and Applications of Metal Additive Manufacturing provides a holistic picture of metal Additive Manufacturing (AM) that encompasses the science, technology and applications for the use of metal AM. Users will find design aspects, various metal AM technologies commercially available, a focus on merits and demerits, implications for qualification ...

Additive Manufacturing

Additive Manufacturing
  • Author : Andreas Gebhardt,Jan-Steffen Hötter
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release Date : 2016-03-07
  • Total pages : 611
  • ISBN : 1493921134
GET BOOK

Summary : The use of additive manufacturing for the direct production of finished products is becoming increasingly important. The method not only reduces the demands on industrial infrastructure, but also opens up new perspectives in terms of decentralized production and customer inclusive individualized production (customization, cyberproduction). Oriented towards the practitioner, in this ...

Cold Spray Additive Manufacturing

Cold Spray Additive Manufacturing
  • Author : Shuo Yin,Rocco Lupoi
  • Publisher : Springer Nature
  • Release Date : 2021
  • Total pages : 190
  • ISBN : 1493921134
GET BOOK

Summary : This book systematically describes the status quo and future development of cold spray additive manufacturing technology. It starts with a comprehensive introduction to the fundamentals of cold spray additive manufacturing, including its history, working principle, equipment, processing parameters and powder feedstock. It then discusses the fundamentals of and the latest ...

Additive Manufacturing Solutions

Additive Manufacturing Solutions
  • Author : Sanjay Kumar
  • Publisher : Springer Nature
  • Release Date : 2021-09-19
  • Total pages : 189
  • ISBN : 1493921134
GET BOOK

Summary : This book serves as an accelerated learning tool for students of Additive Manufacturing. The author presents key aspects of the subject in the form of questions and answers, so learners in a variety of contexts can find answers quickly to their specific question. Solutions to a variety of current, challenging ...

Additive Manufacturing of Metals

Additive Manufacturing of Metals
  • Author : John O. Milewski
  • Publisher : Springer
  • Release Date : 2017-06-28
  • Total pages : 343
  • ISBN : 1493921134
GET BOOK

Summary : This engaging volume presents the exciting new technology of additive manufacturing (AM) of metal objects for a broad audience of academic and industry researchers, manufacturing professionals, undergraduate and graduate students, hobbyists, and artists. Innovative applications ranging from rocket nozzles to custom jewelry to medical implants illustrate a new world of ...

Additive Manufacturing

Additive Manufacturing
  • Author : Amit Bandyopadhyay,Susmita Bose
  • Publisher : CRC Press
  • Release Date : 2015-09-08
  • Total pages : 389
  • ISBN : 1493921134
GET BOOK

Summary : The field of additive manufacturing has seen explosive growth in recent years due largely in part to renewed interest from the manufacturing sector. Conceptually, additive manufacturing, or industrial 3D printing, is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of ...

Additive Manufacturing

Additive Manufacturing
  • Author : Manu Srivastava,Sandeep Rathee,Sachin Maheshwari,TK Kundra
  • Publisher : CRC Press
  • Release Date : 2019-09-17
  • Total pages : 286
  • ISBN : 1493921134
GET BOOK

Summary : There is a growing need for manufacturing optimization all over the world. The immense market of Additive Manufacturing (AM) technologies dictates a need for a book that will provide knowledge of the various aspects of AM for anyone interested in learning about this fast-growing topic. This book disseminates knowledge of ...

The Management of Additive Manufacturing

The Management of Additive Manufacturing
  • Author : Mojtaba Khorram Niaki,Fabio Nonino
  • Publisher : Springer
  • Release Date : 2017-12-26
  • Total pages : 243
  • ISBN : 1493921134
GET BOOK

Summary : This book introduces readers to additive technology and its application in different business sectors. It explores the fundamental impact additive has on technology, particularly on operations, innovation, supply chains, the environment and customer relations. Subsequently, on the basis of a broad survey of the best technology adopters, it offers advice ...

3D Printing and Additive Manufacturing Technologies

3D Printing and Additive Manufacturing Technologies
  • Author : L. Jyothish Kumar,Pulak M. Pandey,David Ian Wimpenny
  • Publisher : Springer
  • Release Date : 2018-08-02
  • Total pages : 311
  • ISBN : 1493921134
GET BOOK

Summary : This book presents a selection of papers on advanced technologies for 3D printing and additive manufacturing, and demonstrates how these technologies have changed the face of direct, digital technologies for the rapid production of models, prototypes and patterns. Because of their wide range of applications, 3D printing and additive manufacturing ...

Additive Manufacturing

Additive Manufacturing
  • Author : Juan Pou,Antonio Riveiro,J. Paulo Davim
  • Publisher : Elsevier
  • Release Date : 2021-05-21
  • Total pages : 768
  • ISBN : 1493921134
GET BOOK

Summary : Additive Manufacturing explains the background theory, working principles, technical specifications, and latest developments in a wide range of additive manufacturing techniques. Topics addressed include treatments of manufactured parts, surface characterization, and the effects of surface treatments on mechanical behavior. Many different perspectives are covered, including design aspects, technologies, materials and ...

Metal Additive Manufacturing

Metal Additive Manufacturing
  • Author : Ehsan Toyserkani,Dyuti Sarker,Osezua Obehi Ibhadode,Farzad Liravi,Paola Russo,Katayoon Taherkhani
  • Publisher : John Wiley & Sons
  • Release Date : 2022-02-07
  • Total pages : 624
  • ISBN : 1493921134
GET BOOK

Summary : METAL ADDITIVE MANUFACTURING A comprehensive review of additive manufacturing processes for metallic structures Additive Manufacturing (AM)—also commonly referred to as 3D printing—builds three-dimensional objects by adding materials layer by layer. Recent years have seen unprecedented investment in additive manufacturing research and development by governments and corporations worldwide. This ...